PELCO® Indicator FIB Lift-Out TEM Grids

PELCO® Indicator FIB Lift-Out TEM Grids

The PELCO® FIB Lift-Out TEM Grids have been designed for in-situ lift to attach the TEM lamellas milled out by SEM/FIB or FIB systems. The design has been optimized for access and flexibility. The nominal diameter of the sturdy PELCO® FIB Lift-Out Grids is 3mm. These grids fit an all standard TEM holders and provide a full view of the lamella attached to the posts.

1. PELCO® Indicator FIB Lift-Out TEM Grids, 5 narrow posts, copper, pkg/100
2. PELCO® Indicator FIB Lift-Out TEM Grids, 8 narrow posts, copper, pkg/100
3. PELCO® Indicator FIB Lift-Out TEM Grids, 2 narrow and 2 wide posts, molybdenum, pkg/25
4. PELCO® Indicator FIB Lift-Out TEM Grids, 2 narrow and 2 wide posts, side access, molybdenum, pkg/25
5. PELCO® Indicator FIB Lift-Out TEM Grids, 2 narrow and 2 wide posts, side access, copper, pkg/100

SEM image of posts from Mo 4-post Indicator FIB Grid

PELCO® FIB Lift-Out TEM Grids come in 4, 5, or 8 post formats. Each post is labelled by an easy to read dot pattern beneath the post. The typical thickness of the copper lift-out grids is 25µm +/-5µm. Mo grids are nominally 25µm thick. The copper grids have a thin ridge surrounding the posts for extra support. Mo grids have sharp edges. Posts are is 60 x 25 x 190µm (W x D x H). The molybdenum and side access grids have four posts, two narrow and two wide. Narrow posts are 60 x 190µm (W x H) and wide posts are 120 x 190µm with a 120 degree notch at the end.