Nanomechanics Probe, 350 N/m, 750kHz, 10nm ROC, 5-Pack.
Uncalibrated.These tips are specifically designed for high mechanical loads and scratch testing applications. By using wear-resistant diamond and a broad cone angle the contact size is well characterized and stays constant during repeated mechanical measurements. These probes have demonstrated highly repeatable deep (~100nm) indentations into materials such as fused silica and can image the indents at high resolution in-situ using the same probe. Each cantilever comes individually characterized with both spring constant and tip radius accurately measured, to enable fully quantitative nanomechanical measurements. Each probe comes with a high-resolution SEM image showing the precise tip shape to enable fully quantitative measurements. A gold reflex coating deposited on the detector side of the cantilever to enhance the reflectance of the laser beam.
Nanomechanical modes: Tomography, nanoscratching, and nanoindentation, and their combination with PeakForce QNM, FASTForce Volume, or contact resonance.
|Tip Height:||12.5 +/- 2.5|
|Tip Radius (Nom):||10|
|Tip Set Back(Nom):||15-25|
|Tilt Compensation:||2 +/- 1|
|Cantilever Material:||Diamond nmech probe, 150N/M, UNCALIBRATED, 5PK|
|Cantilever Thickness (Nom):||4|
|Cantilever Thickness (RNG):||3.5-4.5|
|Back Side Coating:||Reflective Au|