HMX-10

$852.00

4 N/m, 60 kHz, tr/fl=17, Al Reflex Coating

DESCRIPTION
TIP SPECIFICATIONS
CANTILEVER SPECIFICATIONS

A pack of HarmoniX Probes
For nanoscale material property mapping of standard samples in the 10MPa to 10GPa hardness range. HMX probes are preferred over HMXS version probes for stiffer and sticky samples where the tip can get more easily stuck to the surface. Unmounted for HamorniX-enabled, NS5-based AFMs.
Quantity=10

These probes are the characteristic "off-axis" design specific to the Veeco HarmoniX mode. The torsional/flexural spring constant is 17N/m.

Tip Geometry:	Rotated (Symmetric)
Tip Height:	4 - 10
Front Angle:	25 ± 2.5
Back Angle:	15 ± 2.5
Side Angle:	22.5 ± 2.5
Tip Radius (Nom):	10
Tip Radius (Max):	12
Tip Set Back (Nom):	10
Tip Set Back( RNG):	5 - 15

Aluminum reflective coating on the backside of the cantilever is standard. The Al Reflective coating increases the laser signal (A+B) by up to 2.5 times. Although not necessary for general imaging, reflective coating is recommended for thin cantilevers, highly reflective samples, and machine vision applications. Frequency Ratio Ft/Fo: 17

Cantilever Material:	0.01 - 0.025 Ωcm Antimony (n) doped Si
Cantilever Thickness (Nom):	4
Cantilever Thickness (RNG):	3.0 - 5.3
Cantilever Geometry:	Rectangular
Cantilevers Number:	1
Back Side Coating:	Reflective Aluminum