Your Cart is Empty
8000HRD-180
The NEW 208HRD-180 High Resolution Sputter Coater from Cressington offers real solutions to the problems encountered when coating difficult samples for Thin Film and FE-SEM applications. This system features a smaller 28mm diameter target to better utilize more expensive materials such as iridium for FE-SEM, or a wide range of materials for Thin Film applications. This system has a large 180mm OD vacuum chamber that can accommodate up to a 6” wafer, along with a sputter head and rotary stage that can both be tilted to give increased uniformity over larger samples.
The 208HRD-180 High Resolution Sputter Coater is a complete coating solution, including as standard:
1. Pumping system consisting of turbo pump, dry (diaphragm) backing pump for turbo, and vacuum connections
2. MTM-20 High Resolution Film Thickness Controller
3. Rotary-Tilting (RT) Stage with five rotation speeds that can be manually tilted to set angles
4. Large target selection including iridium, aluminum, platinum, gold, palladium, titanium, chromium, indium tin oxide (ITO). See here for full list of targets.
8000HRD-180- 208HRD-180 High Resolution Sputter Coater for FESEM, 115VAC, 50/60Hz, Specify target choice
8000HRD-180-220 - 208HRD-180 High Resolution Sputter Coater for FESEM, 220VAC, 50/60Hz, Specify target choice
Main Features:
Wide choice of Coating Materials. Magnetron head design and effective gas handling allow for a wide choice of target materials .
Economical target utilization. The 208HRD-180 offers a smaller diameter target and modified chamber configurations to give more economical usage for costly materials like iridium.
Novel Sputter Head Design. Plug-in sputter head (one included) can be offset and tilted. Plug-in design makes it easy to switch between target materials.
Large Chamber and Rotary-Tilting Stage: 180mm (7") OD Chamber can accommodate samples up to 6" in diameter.
Precision Thickness Control. Thickness optimized for FESEM application using the MTM-20 High Resolution Thickness Controller, which has a resolution of 0.1nm. This enables precise and reproducible thin coatings, especially in the range of 0.5 - 3nm, a thickness desirable for FESEM applications.
Variable Chamber Geometry. Chamber geometry is used to adjust deposition rate to optimize structure. Height can be adjusted by the addition of metal spacer rings (2 included).
Compact, Modern, Benchtop Design. Space and energy saving design eliminates need for floor space, water or specialized electrical connections. Integrated turbo pump ensures fast pump down combined with high positive pumping speed during sputtering process. Integrated turbo pump ensures fast pump down speed. The backing pump for the turbo is a diaphragm pump, giving oil free operation.
208HRD-180 Sputter Head
The 208HRD-180 has a compact 28mm diameter target design that offers higher efficiency to better utilize target materials which is beneficial for depositing expensive materials like iridium for FE-SEM applications, or when depositing thin films. Additionally, this larger chamber system has plug-in sputter head allowing quick changes between materials. The sputter head can also be offset and tilted which, in conjunction with tilting stage, gives improved coating uniformity over larger samples.
208HRD-180 Chamber
The 208HRD-180 has a modular chamber that consists of 180mm OD glass chamber, metal spacer rings (two included, 15 and 30mm tall), and Rotary-Tilting Stage. These components are labeled in the image below.
The sputter head support pillar can be adjusted into three different positions, varying the overall chamber height. Each adjustment location corresponds to a different metal spacer/ glass chamber / Rotary-Tilting stage configuration. The addition of a spacer ring above the RT stage increases the deposition distances by 15mm or 30mm (one of each included).